Couplers from Hy-Ten Building Steel - stockists & fabricators of reinforcement, structural steel, lintels

< Concrete Accessories - Couplers Menu

Type HT(EP) Positional Coupler

The HT Coupler range is for the mechanical connection of deformed steel reinforcing bars complying with BS4449 grade 500B.

The HT(EP) Positional Coupler is suitable for connecting 2 bars of the same diameter where neither bar can be rotated and neither bar can be moved.

Coupler Ref	Rebar Dia(mm)	Couplers Dimensions (mm)
Coupler Ref	Rebar Dia(mm)	A	B	C	D	E	F	G	H	I	L1(Min)	L1(Max.)	L2(Min.)	L2(Max.)
HT(EP)16	16	18	57	82	15	25	42	14	39	21	9	42	66	99
HT(EP)20	20	19	61	86	15	30	46	16	41	24	11	46	72	107
HT(EP)25	25	25	72	100	15	38	57	20	50	30	13	57	85	129
HT(EP)32	32	32	81	110	15	48	66	25	58	38	17	66	98	147
HT(EP)40	40	40	93	128	15	55	78	30	64	46	20	78	113	171
HT(EP)50	50	50	111	151	15	75	96	36	71	60	24	96	135	207

The HT(EP) Positional Coupler satisfies the requirements of CARES Appendix TA1-B for couplers with reinforcing bars and is produced under an ISO9001 quality management system certified by CARES.

Click here to view the CARES Certificate for HT(EP) Couplers.

The couplers are delivered to site welded to the appropriate rebars. The formation of the joint is achieved by screwing the male and female sections of the coupler together.

The joint should be tightened using a wrench until no further movement is possible between the two sections.

HT(EP) Positional instructions

For further details please contact one of our offices.

To Top




follow watch link		Copyright © HY-TEN Ltd (2001 - 2012). All rights reserved.